Advantages of CNC Machining Over Traditional Machining

Traditional machining is difficult to deal with and has more probabilities for errors. Unlike it, CNC machining is easy to handle and has almost no place for faults.

Here are the top advantages of CNC machining over traditional machining.

Uniformity

You cannot expect consistency in manufactured parts with traditional machining.Even the most experienced operators often fail to do so. You can notice a slight difference in parts. But, there are no such issues with CNC machining. It provides you with great accuracy without any extra efforts because a computer program controls everything. The machine cuts the parts as per the instructions of the software.

Cost-Effective

A traditional machine requires at least one operator to pay close attention to the process and handle it. But, when it comes to CNC machines, one operator can operate several machines at the same time because they have to give commands and monitor the process. The CNC machines can cut materials without any manual help. The operator has just to check the process for errors. So, when one operator can operate several devices, the cost will automatically decrease.

Time-efficient

Unlike traditional machining, CNC machining is time-efficient. CNC machining fulfills your requirements faster than traditional machining does. If required, CNC machines can work 24 hours a day, 7 days a week continuously. They are needed to be stopped just for a short while for maintenance.

Decreased Set-Up Errors

Traditional machining hinges on the proficiency of the operator. Not all workers are capable of setting up parts with precision. So, set-up errors are highly probable. But, when it comes to CNC machining, these errors reduce very much because CNC machines have a special coordinate measuring probe. The probe sets the parts to their positions.

Safe for Workers

Unlike traditional machines, CNC machines are entirely safe. CNC machine operators don’t have to deal with any tools. They don’t have to go to close to the spindle or mill. They don’t have to go to close to the cooling fluids. Some fluids used in the process are harmful to human skin. The operator has to give commands to the machine, and the rest is done by the machine. They just supervise the entire process via the glass. Thus, they don’t get injuries like traditional machine operators often get.

So, if you need precise parts for your needs, look for a specialized CNC machining shop in Vancouver.